R900560047 Z2S 22 B1-5X/SO60 Rexroth Check valves, pilot operated

Product Description

Other Rexroth valve model:

Material number	Designation
R900072795	CHECK VALVE SANDWICH PLATE Z2S22-1-5X=
R900231429	CHECK VALVE SANDWICH PLATE Z2S22-4-5X/SO10
R900346704	CHECK VALVE SANDWICH PLATE Z2S22A1-5X/V
R900432915	CHECK VALVE SANDWICH PLATE Z2S22-1-5X/
R900433031	CHECK VALVE SANDWICH PLATE Z2S22-2-5X/
R900433032	CHECK VALVE SANDWICH PLATE Z2S22A1-5X/
R900433037	CHECK VALVE SANDWICH PLATE Z2S22B1-5X/
R900435968	CHECK VALVE SANDWICH PLATE Z2S22-4-5X/
R900436495	CHECK VALVE SANDWICH PLATE Z2S22-1-5X/V
R900437818	CHECK VALVE SANDWICH PLATE Z2S22B2-5X/
R900439719	CHECK VALVE SANDWICH PLATE Z2S22-3-5X/
R900457907	CHECK VALVE SANDWICH PLATE Z2S22A2-5X/
R900476296	CHECK VALVE SANDWICH PLATE Z2S22-3-5X/V
R900507469	CHECK VALVE SANDWICH PLATE Z2S22A3-5X/
R900509911	CHECK VALVE SANDWICH PLATE Z2S22B4-5X/
R900518345	CHECK VALVE SANDWICH PLATE Z2S22A2-5X/SO40
R900522102	CHECK VALVE SANDWICH PLATE Z2S22A4-5X/
R900525586	CHECK VALVE SANDWICH PLATE Z2S22-2-5X/V
R900528638	CHECK VALVE SANDWICH PLATE Z2S22B3-5X/
R900533752	CHECK VALVE SANDWICH PLATE Z2S22B1-5X/V
R900539434	CHECK VALVE SANDWICH PLATE Z2S22B1-5X/SO40
R900585077	CHECK VALVE SANDWICH PLATE Z2S22A1-5X/SO40
R900589414	CHECK VALVE SANDWICH PLATE Z2S22A2-5X/V
R900591053	CHECK VALVE SANDWICH PLATE Z2S22B2-5X/V
R900985670	CHECK VALVE SANDWICH PLATE Z2S22A4-5X/SO40
R900988977	CHECK VALVE SANDWICH PLATE Z2S22A3-5X/V
R901018153	CHECK VALVE SANDWICH PLATE Z2S22B1-5X/VSO40
R901337072	CHECK VALVE SANDWICH PLATE Z2S22-4-5X/V
R901400384	CHECK VALVE SANDWICH PLATE Z2S22B3-5X/SO40

R900560047 Z2S 22 B1-5X/SO60 Technical data：

hydraulic

Size			25
Maximum operating pressure		bar	315
Cracking pressure (in free direction)			3 / 5 / 7.5 / 10 bar
Maximum flow		l/min	450
Direction of flow			see symbols
Hydraulic fluid			see table "Hydraulic fluid"
Hydraulic fluid temperature range	NBR seals	°C	-30 … +80
Hydraulic fluid temperature range	FKM seals	°C	-20 … +80
Viscosity range		mm²/s	2.8 … 500
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 1)			Class 20/18/15
Area ratio	With pre-opening		A3/A2 ~ 1/12.5 (see sectional drawing)
Area ratio	Version "SO60"		A1/A4 ~ 1/9 (see sectional drawing)

1)	The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.

Hydraulic fluid		Classification	Suitable sealing materials	Standards	Data sheet
Mineral oils		HL, HLP, HLPD, HVLP, HVLPD	NBR, FKM	DIN 51524	90220
Bio-degradable	Insoluble in water	HETG	NBR, FKM	ISO 15380	90221
	Insoluble in water	HEES	FKM	ISO 15380
	Soluble in water	HEPG	FKM	ISO 15380
Flame-resistant	Water-free	HFDU	FKM	ISO 12922	90222
	Water-free	HFDR	FKM	ISO 12922	90222
	Containing water	HFC (Fuchs Hydrotherm 46M, Petrofer Ultra Safe 620)	NBR	ISO 12922	90223
Important information on hydraulic fluids: For more information and data on the use of other hydraulicfluids, please refer to the data sheets above or contact us. There may be limitations regarding the technical valve data (temperature, pressure range, life cycle, maintenance intervals, etc.). The ignition temperature of the hydraulic fluid used must be 50 K higher than the maximum surface temperature. Flame-resistant - containing water: Maximum pressure differential per control edge 50 bar Pressure pre-loading at the tank port > 20 % of the pressure differential, otherwise increased cavitation Life cycle as compared to operation with mineral oil HL, HLP 50 … 100%. Bio-degradable and flame-resistant: If this hydraulic fluid is used, small amounts of dissolved zinc may get into the hydraulic system.

Punto hydraulic equipment Co., Ltd: Emailsales9@boya.com.sg; AddressGuangming new district Shenzhen; Phone(Working Time)sales2@ldhydraulic.com; Fax